Pureco Sealers

Pureco Sealers New Polyurethane
Our polyurethane finishes are water based, non yellowing, self levelling and most of all super tough and exterior grade.

Perfect for use on high traffic furniture pieces, kitchen cabinets and outdoor furniture.

You can add up 30% water to thin out if you wish, just decant into and recycled container and mix well. You can also use a mister.

Can be applied with a brush, roller, sprayer and sponge.

Allow 4 hours between coats, 2 coats are recommended.

Cure time is 7-14 days depending on the weather. 25 degrees is optimum curing temperature.
Pureco Matt Sealer 
  • Matte sealer is ultra flat and easy to use, giving an invisible finish over your paint finish.
  • This sealer can be tinted using both ranges of our paint.
  • You can also use waxes over this product if you choose.
  • Apply with brush or wipe on with a damp lint free cloth. 
  • Perfect to use under rub on transfers, can be used as a image transfer medium as well.
  • 600ml will cover 6–8 square meters depending on application technique and surface roughness.
  • Water clean up
  • Use 1 coat only on dark colours as the mattifying agent will give it a cloudy appearance.
  • Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 4 Hours.
  • 600ml RRP $45 200ml RRP $23

Pureco Eggshell/Semi Gloss Sealer

  • is designed for use over any of our paints, sealing transfers and decoupage.
  • The sheen is between a gloss and satin sheen.
  • It is easy clean, self levels for use on interiors, exteriors and water clean up.
  • It can be tinted with any of our paint colours and used as a glaze. 
  • Will repel staining and is a fantastic product for so many uses.
  • Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
  • Always do a test patch to see if this product is right for your project.
  • Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
  • No more than 2 coats should be required.
  • Allow your first coat to dry thoroughly before applying your next coat.
  • Coverage is 13 square metres per litre, depending on application technique and surface roughness.
  • Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
  • Can be used for gluing down & sealing wallpaper.
  • This product should not be used if air temperature is below 10 degress or above 35 degrees.
  • Do not apply in direct sunlight.
  • Use in a well ventilated area.
  • Water clean up. 100% washable.
  • 600ml RRP $45 200ml RRP $23

Pureco Satin Sheen

  • non-yellowing, water based sealant.
  • is designed for use over any of our paints, sealing transfers and decoupage.
  • The sheen is satin sheen.
  • It is easy clean, self levels for use on interiors, exteriors and water clean up.
  • It can be tinted with any of our paint colours and used as a glaze. 
  • Will repel staining and is a fantastic product for so many uses.
  • Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
  • Always do a test patch to see if this product is right for your project.
  • Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
  • No more than 2 coats should be required.
  • Allow your first coat to dry thoroughly before applying your next coat.
  • Coverage is 13 square metres per litre, depending on application technique and surface roughness.
  • Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
  • Can be used for gluing down & sealing wallpaper.
  • This product should not be used if air temperature is below 10 degress or above 35 degrees.
  • Do not apply in direct sunlight.
  • Use in a well ventilated area.
  • Water clean up. 100% washable.

Pureco Gloss Sealer

  • Gloss sealer is our highest sheen level sealer.
  • Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
  • Can be brushed, rollered or wiped on. Gloss sealer is quite a sticky consistancy and water can be added to heplp application.
  • If spraying add up to 10% water.
  • 600ml will cover 10-12 square metres
  • Apply 2 coats as required
  • Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.
  • water clean up
  • Exterior/Interior use
  • This product should not be used if air temperature is below 10 degress or above 35 degrees.
  • Do not apply in direct sunlight.
  • Use in a well ventilated area.
  • Water clean up. 100% washable.
  • 600ml RRP $45 200ml RRP $23