Pureco Sealers - Top Coat

Pureco Sealers - Top Coat

  • $44.95
    Unit price per 
Shipping calculated at checkout.


pureco matte sealer

  • Matte sealer is ultra flat and easy to use, giving an invisible finish over your paint finish.
  • This sealer can be tinted using both ranges of our paint.
  • You can also use waxes over this product if you choose.
  • Apply with brush or wipe on with a damp lint free cloth. 
  • Perfect to use under rub on transfers, can be used as a image transfer medium as well.
  • 600ml will cover 6–8 square meters depending on application technique and surface roughness.
  • Water clean up
  • Use 1 coat only on dark colours as the mattifying agent will give it a cloudy appearance.
  • Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 4 Hours.

pureco eggshell sealer

  • is designed for use over any of our paints, sealing transfers and decoupage.
  • The sheen is between a matte and satin sheen.
  • It is easy clean, self levels for use on interiors, exteriors and water clean up.
  • It can be tinted with any of our paint colours and used as a glaze. 
  • Will repel staining and is a fantastic product for so many uses.
  • Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
  • Always do a test patch to see if this product is right for your project.
  • Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
  • No more than 2 coats should be required.
  • Allow your first coat to dry thoroughly before applying your next coat.
  • Coverage is 13 square metres per litre, depending on application technique and surface roughness.
  • Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
  • Can be used for gluing down & sealing wallpaper.
  • This product should not be used if air temperature is below 10 degress or above 35 degrees.
  • Do not apply in direct sunlight.
  • Use in a well ventilated area.
  • Water clean up. 100% washable.

pureco gloss sealer

  • Gloss sealer is our highest sheen level sealer.
  • Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
  • Can be brushed, rollered or wiped on. Gloss sealer is quite a sticky consistancy and water can be added to heplp application.
  • If spraying add up to 10% water.
  • 600ml will cover 10-12 square metres
  • Apply 2 coats as required
  • Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.
  • water clean up
  • Exterior/Interior use
  • This product should not be used if air temperature is below 10 degress or above 35 degrees.
  • Do not apply in direct sunlight.
  • Use in a well ventilated area.
  • Water clean up. 100% washable.
  • 600ml RRP $45 200ml RRP $23

 

Pureco Green Finishing Sponge

This sponge applicator fits in your hand perfectly. Apply Pureco or any waterbased topcoat with a dry sponge for a smooth, even finish!  

Can be used with Stain and Glaze. You can use a damp sponge by squeezing out excess water.